Stanley, maker of reusable water bottles and cups, seems to be in hot water. Just a few weeks ago, people were lining up to buy the giant collectible Stanley cups, but since then there’s been a U-turn. Videos of Stanley cup owners testing theirs for lead with at-home kits have raised alarms. Some of those tests allegedly returned positive results, though not all, and such kits can be unreliable. But Stanley responded with a statement saying it uses “some lead” in the manufacturing process:
“Our manufacturing process currently employs the use of an industry-standard pellet to seal the vacuum insulation at the base of our products; the sealing material includes some lead. Once sealed, this area is covered with a durable stainless steel layer, making it inaccessible to consumers. Rest assured that no lead is present on the surface of any Stanley product that comes into contact with the consumer nor the contents of the product. In the rare occurrence the base cap of a product comes off due to ordinary use and exposes this seal, it is eligible for our Lifetime Warranty.”
Just how common is this industry standard? We spoke with several popular reusable bottle companies—and outside experts—to see how prevalent the practice is to get more answers.
Updated February 13, 2024: We’ve added Sigg to the list of companies that have responded to us. It does not use lead in its manufacturing. Yeti also notes on its website that it uses some lead, and we’ve noted it below.
Why Is Lead Used in Water Bottles?
Stanley uses the same manufacturing process for all its vacuum-sealed bottles, including the popular Stanley Quencher tumbler. Vacuum-sealed vessels usually have two layers (which is why they’re occasionally called double-walled insulated bottles). In between those two layers is dead space designed to minimize heat or cold transfer from the inner layer to the outer layer. This is what helps to keep your drink hot or cold for a long time.
Photograph: Adrienne So
You can see the pellet that Stanley refers to at the bottom of your drink container. It seals those layers together where they all meet at the bottom of the bottle, in a process called lead soldering. Technically, the vessel does contain lead, but it’s enclosed with stainless steel and should never come in contact with your drink or skin. However, should you drop the water bottle or if it otherwise gets damaged and this piece of steel comes loose, there’s a chance the lead can be exposed to your skin.
Lead is a naturally occurring toxic metal. The World Health Organization (WHO) cites that there is no safe level of lead exposure. “Once lead enters the body, it is distributed to organs such as the brain, kidneys, liver, and bones.” High levels of lead exposure can be fatal. With lower levels of exposure—which can happen with a microscopic amount—lead poisoning in adults can cause nerve disorders, decreased kidney function, and fertility issues. In children, it can cause developmental delays and seizures. The WHO says children are “particularly vulnerable to lead poisoning because they absorb four to five times as much ingested lead as adults.”
“Lead is ubiquitous in the environment, so low levels of daily exposure are a fact of life,” says Jane Houlihan, national director of science and health at Healthy Babies Bright Futures. “Exposures and risks add up day to day from lead in food, water, house dust, and soil. This makes it all the more important for companies to keep lead out of consumer products. Children don’t need another potential source of lead in their lives.”
What Do Other Brands Use?
Lead soldering is low-cost and easy to use and is a common practice from a variety of manufacturers. However, alternative methods are available. Several of the reusable water bottle companies we reached out to do not use lead in their manufacturing process. Here’s the list:
- Owala (no lead), which makes our favorite water bottle the FreeSip, and a Stanley-dupe tumbler, says it has never used lead in its manufacturing process. “The production of vacuum-sealed containers using lead-free solder is more costly and complicated. However, we made a commitment from day one with Owala to use lead-free solder on our bottles,” an Owala spokesperson says.
- Hydro Flask (no lead since 2013), another internet-famous water bottle company, stopped using lead solder more than 10 years ago. “By mid-2013, the lead was out of the Hydro Flask production process because the brand designed a proprietary sealant, TempShield,” a Hydro Flask spokesperson says.
- Klean Kanteen (no lead) also forgoes lead, instead using a noncrystalline silica bead to create its vacuum-insulated bottles. “The process, using silica instead of lead, is the same except higher heat is required to melt the silica,” says Rich Haver, the company’s director of global operations. While some forms of silica can be dangerous if very fine particles are inhaled—sand is made from crystalline silica, so even finer than that—this doesn’t apply to noncrystalline silica glass. “Silica in its noncrystalline form does not have the same respiratory health properties as crystalline silica,” says Marty Cohen, a teaching professor in the Department of Environmental and Occupational Health Sciences at the University of Washington.
- Sigg (no lead) makes stainless steel bottles in Switzerland and it confirmed it uses lead-free soldering for all of its vacuum-sealed products.
- MiiR (lead used) confirmed its use of lead in its manufacturing process with some of its products. According to its website, “This pellet does contain lead for manufacturing efficiency, waste reduction, and to ensure a complete seal. For these reasons and because there is zero lead exposure, MiiR utilizes this process with confidence.”
- LifeStraw (lead used) makes straws and filtered bottles that remove bacteria, microplastics, and parasites from water. We really liked the Go Series Filtered Water Bottle for this reason. That makes it the most surprising company to confirm it uses “a lead soldering dot as part of the manufacturing sealing process.”
- Yeti (lead used) is a popular outdoor gear manufacturer, and while it has not responded to multiple requests for comment, the company’s FAQ section on its website says its Yeti Rambler drinkware uses a sealing pellet with a lead soldering process.
- Other brands (unknown): The following companies have not responded to our requests for comment: S’well, HydroJug, and Greens Steel.
The Problem With Lead in Manufacturing
Even if the cup or bottle is never damaged and you’re never exposed to lead, if it’s used in the manufacturing process, workers are still around the material in some way. The solder training institute EPTAC says on its website that the amount of lead on solders is likely not going to cause severe health problems, but there’s still a risk for workers exposed to lead during the process.
“When lead is used in manufacturing, there is a risk of lead exposure for consumers of those products, especially for products intended for use in food consumption, like drinkware,” says a representative for the Centers for Disease Control and Prevention. “There is also a potential occupational safety risk for workers and, without proper safeguards, could be a risk for workers’ families through take-home lead exposures.”
If your Stanley bottle or cup gets damaged, you can ask for a replacement under Stanley’s lifetime warranty. We asked Stanley if customers could return undamaged cups, or if the company plans to change its manufacturing process, but it only pointed us to the same information page about its use of lead.
If you buy something using links in our stories, we may earn a commission. This helps support our journalism. Learn more.
